Jason, this will work just fine. I’ve not fully embraced a transition to their products for my clients yet but had one recently where the customer insisted on this for their project and I was in the exact scenario while we waited for the battery to arrive. No external bypass required for this reason. However it does not work without a minor setting activation and even then there was a 10-20 second delay before the relay is closed and the utility will pass through.
Nick > On Apr 1, 2022, at 9:29 AM, Jason Szumlanski via RE-wrenches > <[email protected]> wrote: > > If you set up the inverter in a straight grid tie mode, does it still pass > power through to the load terminals when on grid? > > I ask this, because a client wants us to connect it with a backup load panel > but no battery right now. He wants to add the battery later. > > My other thought is to install a bypass switch to pass grid power directly to > the subpanel, which would act as a service bypass for the future anyway. > > Jason Szumlanski > Florida Solar Design Group > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
