Jason The programming is different with a battery vs no battery so if he is removing the battery this may create an issue, I have not tried myself to disconnect a battery once in place Jerry
On Fri, Apr 1, 2022 at 11:52 AM Jason Szumlanski via RE-wrenches < [email protected]> wrote: > Fantastic. Thanks! > > As a follow up, he's considering connecting a battery bank with an > Anderson connector. This is not the golf cart scenario I mentioned in > another thread, but he wants to be able to wheel away his battery into > storage. Don't ask me why... I can't figure it out myself. Do you see any > issues with this? I guess the question I have is what happens when the > battery is connected and he's on grid and he decides to disconnect the > battery? I'm guessing nothing, but I could be wrong. Will he need to change > the settings back to grid-tie only? > > Jason > > > > > > > On Fri, Apr 1, 2022 at 2:29 PM Nick A Lucchese via RE-wrenches < > [email protected]> wrote: > >> Jason, this will work just fine. I’ve not fully embraced a transition to >> their products for my clients yet but had one recently where the customer >> insisted on this for their project and I was in the exact scenario while we >> waited for the battery to arrive. No external bypass required for this >> reason. However it does not work without a minor setting activation and >> even then there was a 10-20 second delay before the relay is closed and the >> utility will pass through. >> >> Nick >> >> >> > On Apr 1, 2022, at 9:29 AM, Jason Szumlanski via RE-wrenches < >> [email protected]> wrote: >> > >> > If you set up the inverter in a straight grid tie mode, does it still >> pass power through to the load terminals when on grid? >> > >> > I ask this, because a client wants us to connect it with a backup load >> panel but no battery right now. He wants to add the battery later. >> > >> > My other thought is to install a bypass switch to pass grid power >> directly to the subpanel, which would act as a service bypass for the >> future anyway. >> > >> > Jason Szumlanski >> > Florida Solar Design Group >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
