Matt,
I guess my questions are 1/2" plywood or 5/8" and how thick
is the foam? Oh and I assume its nominal 2X6 T&G? Do you know how the
plywood is attached?.....through the foam into the T&G?... to stringers,
nailers or whatever they're called?
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.(shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA 95983
530.284.1925 Office/ 530.258.1641 Cell
CA Lic 874049
Solar powered since 1982
On 3/29/2023 7:53 AM, Dave Tedeyan via RE-wrenches wrote:
Hi Matt,
I've used these in the past when on a comp roof and there was no good
way to get into the rafters (or TJI's in this case)
https://sunmodo.com/nanomount/
You might want to replace the screws with something shorter and
beefier though to get more grip if you are only going into 1/2" plywood.
Cheers,
Dave
On Wed, Mar 29, 2023 at 10:38 AM Matt Sherald via RE-wrenches
<[email protected]> wrote:
Hi All,
I've run into a roof-mounted job where the roof is built-up with
the following:
Comp shingle
Plywood
Foam board
T&G (roof deck, but also interior ceiling)
The beams that hold the t&g up are wide-spaced and not convenient
for fastening the full extent of the array.
This being the case, I was considering other fastening options and
am writing to pick the collective brain of the Wrenches to see how
others have addressed similar situations.
One thought I had was to use the PLP Easy Mounting Foot and I'd be
glad for any opinions on that or another solution.
-Matt
--
Matt Sherald
PIMBY Energy, LLC
304-704-5943
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work,
try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
--
Logo <https://www.sungineersolar.com/>
Dave Tedeyan, P.E.
Owner | Sungineer Solar
p: he | him | his
a: 1653 Slaterville Rd. | Ithaca, NY 14850
w: www.sungineersolar.com <http://www.sungineersolar.com/>
c: (607) 288-2898
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here:http://re-wrenches.org
List Address:[email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
--
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
