I just pulled out an 8048 and replaced it with a 8048A due to the lack of AC boards for 8048s. I didn't know any better and put in a new 8048A board and learned the hard way that they aren't cross compatible. Smoked it. If you think you can find a board for it, it's yours.
On Wed, May 10, 2023 at 11:06 AM Darryl Thayer via RE-wrenches < [email protected]> wrote: > Sorry if this is nonsense, but your existing Radian is your "AC grid > source," It can act as the paralleling. > AC coupling source. I did this about 20 to 30 years ago, using FX > inverters, not Radians, to power a large motor. > Can your Radian Mate 3 run in grid zero? Or if not, one inverter runs all > the time as a grid source ( grid forming) > the second inverter (grid following) runs in Grid-Zero mode, with > "off-set" set at 30 Amps. If the load is less than 30 amps, > the grid-following inverter carries the load. (The grid-forming inverter > supplies the grid signal, and the following inverter > carries the load.) When your load exceeds 30 amps, the extra current > comes from the grid-forming inverter. The Radian can > pass up to 50 or 60 amps from the forming inverter. You can get 50 to 60 > amps > to the load when you add the forming and following inverters. Errors: > this will double your parasitic load, I have not done this > so beware. This is not the answer for V2H; other inverters can work in > this combination but > > > On Wed, May 10, 2023 at 10:04 AM frenergy via RE-wrenches < > [email protected]> wrote: > >> The wrench list has some very creative thinkers that may have a >> go around to be able to master/slave an old Radian's output with a new >> one. Outback says this is not do-able. We're completely off-grid out >> here and have been charging EVs (one at a time) with an eleven year old >> Radian (GS8048) for years but the Ford Lightning is on its way. Outback >> says I can't add the newer GS8048A to exiting version (no "A"). >> >> Ideas?? >> >> Bill >> >> Feather River Solar Electric >> Bill Battagin, Owner >> 4291 Nelson St.(shipping) >> 5575 Genesee Rd. (USPS, UPS) >> Taylorsville, CA 95983 >> 530.284.1925 Office/ 530.258.1641 Cell >> CA Lic 874049 >> Solar powered since 1982 >> >> >> -- >> This email has been checked for viruses by Avast antivirus software. >> www.avast.com >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > -- Michael Morningstar Morningstar Electric PO Box 1494 Mount Shasta, CA 96067 530-921-0560 [email protected]
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
