Michael,
That's rather dis-heartening if boards are no longer
available for a 10 year old product. Got a long day out of town today
but will ruminate on responses.
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.(shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA 95983
530.284.1925 Office/ 530.258.1641 Cell
CA Lic 874049
Solar powered since 1982
On 5/10/2023 6:48 PM, Michael Morningstar via RE-wrenches wrote:
I just pulled out an 8048 and replaced it with a 8048A due to the lack
of AC boards for 8048s. I didn't know any better and put in a new
8048A board and learned the hard way that they aren't cross
compatible. Smoked it. If you think you can find a board for it, it's
yours.
On Wed, May 10, 2023 at 11:06 AM Darryl Thayer via RE-wrenches
<[email protected]> wrote:
Sorry if this is nonsense, but your existing Radian is your "AC
grid source," It can act as the paralleling.
AC coupling source. I did this about 20 to 30 years ago, using FX
inverters, not Radians, to power a large motor.
Can your Radian Mate 3 run in grid zero? Or if not, one inverter
runs all the time as a grid source ( grid forming)
the second inverter (grid following) runs in Grid-Zero mode, with
"off-set" set at 30 Amps. If the load is less than 30 amps,
the grid-following inverter carries the load. (The grid-forming
inverter supplies the grid signal, and the following inverter
carries the load.) When your load exceeds 30 amps, the extra
current comes from the grid-forming inverter. The Radian can
pass up to 50 or 60 amps from the forming inverter. You can get
50 to 60 amps
to the load when you add the forming and following inverters.
Errors: this will double your parasitic load, I have not done this
so beware. This is not the answer for V2H; other inverters can
work in this combination but
On Wed, May 10, 2023 at 10:04 AM frenergy via RE-wrenches
<[email protected]> wrote:
The wrench list has some very creative thinkers that
may have a
go around to be able to master/slave an old Radian's output
with a new
one. Outback says this is not do-able. We're completely
off-grid out
here and have been charging EVs (one at a time) with an eleven
year old
Radian (GS8048) for years but the Ford Lightning is on its
way. Outback
says I can't add the newer GS8048A to exiting version (no "A").
Ideas??
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.(shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA 95983
530.284.1925 Office/ 530.258.1641 Cell
CA Lic 874049
Solar powered since 1982
--
Michael Morningstar
Morningstar Electric
PO Box 1494
Mount Shasta, CA 96067
530-921-0560
[email protected]
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here:http://re-wrenches.org
List Address:[email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
--
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
