This may or may not be helpful, but are you sure you need the CTs? They are not always required. You would need them for power export limiting or grid peak shaving, but for straight grid-tied with or without battery backup, you don't need them.
Jason Szumlanski Florida Solar Design Group On Wed, Jul 17, 2024, 8:41 PM Chris Sparadeo via RE-wrenches < [email protected]> wrote: > Hey there wrenchers, > > I am working on a larger project with 6 Sol-Ark 15K units and an 800A > service. The main service conductors are 3 parallel runs of 400 kcmil. I am > wondering how to CT these conductors from the master inverter. Sol Ark tech > support has not been very helpful so far. I have the included 300A CTs > ....and I do know that they make a 600A CT, but its physical size and > rating aren't a good fit. Does anyone have experience with either a Sol Ark > or third party CT that might fit this 800A configuration? > > Kindly, > > Chris Sparadeo > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
