Hi Jason, Sorry for not clarifying. This is a export limited scenario, so CTs would still be required.
On Thu, Jul 18, 2024 at 6:51 AM Jason Szumlanski < [email protected]> wrote: > This may or may not be helpful, but are you sure you need the CTs? They > are not always required. You would need them for power export limiting or > grid peak shaving, but for straight grid-tied with or without battery > backup, you don't need them. > > Jason Szumlanski > Florida Solar Design Group > > > > > On Wed, Jul 17, 2024, 8:41 PM Chris Sparadeo via RE-wrenches < > [email protected]> wrote: > >> Hey there wrenchers, >> >> I am working on a larger project with 6 Sol-Ark 15K units and an 800A >> service. The main service conductors are 3 parallel runs of 400 kcmil. I am >> wondering how to CT these conductors from the master inverter. Sol Ark tech >> support has not been very helpful so far. I have the included 300A CTs >> ....and I do know that they make a 600A CT, but its physical size and >> rating aren't a good fit. Does anyone have experience with either a Sol Ark >> or third party CT that might fit this 800A configuration? >> >> Kindly, >> >> Chris Sparadeo >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >>
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
