I have been thinking a lot recently about the reasons off-grid systems can shut down, and working on strategies to prevent these nuisances that require manual intervention.
Ideally, a BMS should never shut down due to low voltage/SOC because a properly programmed inverter should reach it's cut off well before the BMS decides it needs to protect the battery, especially where there is closed loop communication. But let's say that happens, where the BMS does make the DC battery output go to zero. It seems to me like the inverter should be able to start a generator, and then signal to the BMS that a charging source is available. But I'm not aware of any system that actually does this. The inverter should be able to wake up the battery. I can see this being particularly possible where one manufacturer is writing the code (I'm thinking Midnite AIO/Powerflo). Of course, the inverter would have to have power in order to do that, so if it's nighttime and there is no PV, the inverter power would need to come from somewhere. I have two thoughts. First, someone could manually start the generator, waking up the inverter, but they would not have to reset the BMS if the inverter told it to wake up. The second way would be for the inverter to somehow close the 2-wire start circuit upon inverter shutdown, restoring power to the inverter automatically. If those are not options, an external NO relay powered by the inverter output could be added to the 2-wire start circuit, perhaps with a time delay to return to the NO position to allow the generator to remain powered until the inverter does it's thing and starts charging the batteries. Anyway, my question is whether any inverter/battery combination out there works in a way that the inverter tells the battery there is a charging source available to wake up the BMS and reconnect DC power. And if not, why? Jason Szumlanski Florida Solar Design Group
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
