do you mean like this?

https://www.delcity.net/store/fuses-fuse-accessories/taps/marine-rated-battery-fuses/?mkwid=&crid=&mp_kw=&mp_mt=&gad_source=1&gad_campaignid=18195815732&gbraid=0AAAAAD-3-ftBrJhT7rwpLMbxfXZIuexqw
Marine Rated Battery Fuses
delcity.net


> On Nov 15, 2025, at 4:10 PM, Tyrone Houck via RE-wrenches 
> <[email protected]> wrote:
> 
> I think I found what I was picturing...has anyone used Marine Rated Battery 
> Fuses/terminal fuses in a battery combiner situation? Or would I be better 
> off just bolting a class T fuse in between my lug and busbar.. the class T 
> almost seems stronger but with more exposed metal..
> This application isn't specific to a certain busbar but for discussion sake 
> picture 4 batteries landing on a MNBCB 1000/2000
> 
> 
>    
> 
> On Sat, Nov 15, 2025, 3:00 PM Tyrone Houck <[email protected] 
> <mailto:[email protected]>> wrote:
>> Yeah. I'm looking for something with a smaller footprint, ideally with one 
>> hole that physically goes between the lug and post.. I've seen them but 
>> can't remember the manufacturer.. I guess I could bolt a class T to the 
>> busbar and float the other end and just bolt the lug to it..
>> 
>> 
>>    
>> 
>> On Sat, Nov 15, 2025, 2:39 PM jay via RE-wrenches 
>> <[email protected] 
>> <mailto:[email protected]>> wrote:
>>> I’m not sure what buss bar you have but have you looked at Class T fuses?
>>> 
>>> jay
>>> 
>>>> On Nov 15, 2025, at 3:11 PM, Tyrone Houck via RE-wrenches 
>>>> <[email protected] 
>>>> <mailto:[email protected]>> wrote:
>>>> 
>>>> Greetings Wrenches,
>>>> I am looking for a product that allows a 250A fuse to be added at the post 
>>>> connection of a battery busbar. Specifically, nominal 48v combiner busbar 
>>>> for multiple lifepo4 batteries. What I really want is something that can 
>>>> be added right at the connection point of the busbar where the lug 
>>>> attaches to the busbar. Compact form function helps...something similar to 
>>>> a "fusible link" type thing but not cheap junk and rated for 50-60v. I 
>>>> like the little fuses that victron uses in their battery but want 
>>>> something that can retrofit into a conventional battery busbar. I 
>>>> appreciate any suggestions! Thank you in advance!
>>>> Sunny Regards,
>>>> 
>>>> Tyrone Houck
>>>> Oregon Solarworks LLC
>>>> CCB #204937 LRT #076
>>>> 541-787-1366
>>>> [email protected] <mailto:[email protected]>
>>>> 
>>>> 
>>>>    
>>>> _______________________________________________
>>>> List sponsored by Redwood Alliance
>>>> 
>>>> Pay optional member dues here: http://re-wrenches.org 
>>>> <http://re-wrenches.org/>
>>>> 
>>>> List Address: [email protected] 
>>>> <mailto:[email protected]>
>>>> 
>>>> Change listserver email address & settings:
>>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>> 
>>>> There are two list archives for searching. When one doesn't work, try the 
>>>> other:
>>>> https://www.mail-archive.com/[email protected]/
>>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>>> 
>>>> List rules & etiquette:
>>>> http://www.re-wrenches.org/etiquette.htm
>>>> 
>>>> Check out or update participant bios:
>>>> http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
>>>> 
>>> 
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>> 
>>> Pay optional member dues here: http://re-wrenches.org 
>>> <http://re-wrenches.org/>
>>> 
>>> List Address: [email protected] 
>>> <mailto:[email protected]>
>>> 
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>> 
>>> There are two list archives for searching. When one doesn't work, try the 
>>> other:
>>> https://www.mail-archive.com/[email protected]/
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>> 
>>> List rules & etiquette:
>>> http://www.re-wrenches.org/etiquette.htm
>>> 
>>> Check out or update participant bios:
>>> http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
>>> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: [email protected]
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the 
> other:
> https://www.mail-archive.com/[email protected]/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to