Yes. Something like that though I think they use a holder with a seperate attachment point.
On Sat, Nov 15, 2025, 3:17 PM jay via RE-wrenches < [email protected]> wrote: > do you mean like this? > > > [image: 78976_primary.jpeg] > > Marine Rated Battery Fuses > <https://www.delcity.net/store/fuses-fuse-accessories/taps/marine-rated-battery-fuses/?mkwid=&crid=&mp_kw=&mp_mt=&gad_source=1&gad_campaignid=18195815732&gbraid=0AAAAAD-3-ftBrJhT7rwpLMbxfXZIuexqw> > delcity.net > <https://www.delcity.net/store/fuses-fuse-accessories/taps/marine-rated-battery-fuses/?mkwid=&crid=&mp_kw=&mp_mt=&gad_source=1&gad_campaignid=18195815732&gbraid=0AAAAAD-3-ftBrJhT7rwpLMbxfXZIuexqw> > > <https://www.delcity.net/store/fuses-fuse-accessories/taps/marine-rated-battery-fuses/?mkwid=&crid=&mp_kw=&mp_mt=&gad_source=1&gad_campaignid=18195815732&gbraid=0AAAAAD-3-ftBrJhT7rwpLMbxfXZIuexqw> > > > On Nov 15, 2025, at 4:10 PM, Tyrone Houck via RE-wrenches < > [email protected]> wrote: > > I think I found what I was picturing...has anyone used Marine Rated > Battery Fuses/terminal fuses in a battery combiner situation? Or would I be > better off just bolting a class T fuse in between my lug and busbar.. the > class T almost seems stronger but with more exposed metal.. > This application isn't specific to a certain busbar but for discussion > sake picture 4 batteries landing on a MNBCB 1000/2000 > > > > > On Sat, Nov 15, 2025, 3:00 PM Tyrone Houck <[email protected]> wrote: > >> Yeah. I'm looking for something with a smaller footprint, ideally with >> one hole that physically goes between the lug and post.. I've seen them but >> can't remember the manufacturer.. I guess I could bolt a class T to the >> busbar and float the other end and just bolt the lug to it.. >> >> >> >> >> On Sat, Nov 15, 2025, 2:39 PM jay via RE-wrenches < >> [email protected]> wrote: >> >>> I’m not sure what buss bar you have but have you looked at Class T fuses? >>> >>> jay >>> >>> On Nov 15, 2025, at 3:11 PM, Tyrone Houck via RE-wrenches < >>> [email protected]> wrote: >>> >>> Greetings Wrenches, >>> I am looking for a product that allows a 250A fuse to be added at the >>> post connection of a battery busbar. Specifically, nominal 48v combiner >>> busbar for multiple lifepo4 batteries. What I really want is something that >>> can be added right at the connection point of the busbar where the lug >>> attaches to the busbar. Compact form function helps...something similar to >>> a "fusible link" type thing but not cheap junk and rated for 50-60v. I like >>> the little fuses that victron uses in their battery but want something that >>> can retrofit into a conventional battery busbar. I appreciate any >>> suggestions! Thank you in advance! >>> Sunny Regards, >>> >>> Tyrone Houck >>> Oregon Solarworks LLC >>> CCB #204937 LRT #076 >>> 541-787-1366 >>> [email protected] >>> >>> >>> >>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> Pay optional member dues here: http://re-wrenches.org >>> >>> List Address: [email protected] >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> There are two list archives for searching. When one doesn't work, try >>> the other: >>> https://www.mail-archive.com/[email protected]/ >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette: >>> http://www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> http://www.members.re-wrenches.org >>> >>> >>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> Pay optional member dues here: http://re-wrenches.org >>> >>> List Address: [email protected] >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> There are two list archives for searching. When one doesn't work, try >>> the other: >>> https://www.mail-archive.com/[email protected]/ >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette: >>> http://www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> http://www.members.re-wrenches.org >>> >>> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
