I have the same issue, but a single inverter installation. It happened a few 
times at night. 

No log entry. 

Tech support suggested upgrading to version 7. I asked for release notes. I 
haven’t upgraded yet, I haven’t had time to go babysit it for the customer. 
I’ve been trying to train the customer to do it himself. (bypass mode, standby, 
etc. I did install a bypass switch and I also installed a bluetti battery on 
the router.) 

Release notes would be nice. 

Thank you,

Maverick

Maverick Brown
Off-Grid Solar Commander since 2006
Maverick Solar Enterprises, Inc.
 • Solar Commander Remote Power
 • SunFlow Systems Cathodic Protection 
[email protected]
512-460-9825



> On Dec 26, 2025, at 10:53 AM, Jason Szumlanski via RE-wrenches 
> <[email protected]> wrote:
> 
> 
> Hi all,
> 
> I have two new systems experiencing random shutdowns anywhere from 48 hours 
> to 3 weeks apart. The inverters will simply shut off, going into standby with 
> no power to the loads, and absolutely nothing in the fault logs. Turning them 
> back on with the master inverter power switch or remotely with app restores 
> normal operation for some random period of time before it happens again. 
> 
> Here are the similarities:
> 
> -Parallel inverter systems (3 or 4 AIO)
> -Powerflo16 batteries, closed loop comms (80 kWh and 112 kWh)
> -Grid interactive systems with netmetering 
> -Large PV systems with DC Coupled PV on each inverter
> -Shutdowns typically happen at night, early morning hours
> -Loads are low and nothing out of the ordinary on the load side happening at 
> the time of shutdown
> -Confirmed no errant Neutral to Ground bonds that shouldn't be there
> -Proper installation of ferrite rings
> -AP Smart RSDs
> 
> Differences:
> -Two different firmwares (but all firmware per site is the same per 
> inverter). Updated at different times by Midnite tech support remotely
> 
> 
> Has anyone experienced anything like this, and if so, did you find a 
> resolution?
> 
> I have a call into Midnite and hope to make some progress on Monday. I'm 
> seriously concerned, especially with one site that doesn't have a bypass (due 
> to space constraints). I can't have these sites going down and cutting power 
> to the homes!
> 
> 
> Jason Szumlanski 
> Florida Solar Design Group 
> 
> 
> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: [email protected]
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the 
> other:
> https://www.mail-archive.com/[email protected]/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to