I'm not 100%, but I think the warning light might be for the temp sensor on the FET board internal to the inverter.  I've had to replace those a few times.  I think I even have a replacement sensor on the shelf, if you need.

Ray Walters
Remote Solar

On 1/8/2026 3:00 PM, Drake Chamberlin via RE-wrenches wrote:
A couple of years back, a client changed from lead acid batteries to LiFeBlue, lithium batteries. At that time the temperature sensor was removed. The other day, a warning light started blinking. The warning turned out to be a bad temperature sensor. It is strange that this message showed up now, as the sensor has been gone for years.
Is there any way to turn off the warning light?
Thank you,
Drake

/Drake Chamberlin/

/Athens Electric LLC/

/Ohio Electrical Contractor’s License 44810/

/NABCEP Certified PV Installation Professional/



--

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here:http://re-wrenches.org

List Address:[email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to