Hi Chris

The key is exactly what voltage, current and for how long. 

I’ve had a few cells fail over the years usually not my customers, and I think all but 1 was customer screwup. Wrong charge voltage, time not enough amps etc. and not testing via specific gravity and volts. 
but 1 was a true failure. 

The fall of lead has been faster than I expected. 

Jay





On Jun 17, 2026, at 2:54 PM, Chris Daum via RE-wrenches <[email protected]> wrote:



Yes, I’ve been selling these since 2007.  Damn good batteries; I did hear from Tommy in a roundabout fashion; THE contact person at Enersys is Jammie Bednarek, 484-203-8660, and her e-mail is [email protected].  If you have a bunch of these batteries out there, take note!

 

And thanks for your input.

 

Chris Daum

Oasis Montana Inc.

406-777-4309

 

From: RE-wrenches <[email protected]> On Behalf Of Ray Walters via RE-wrenches
Sent: Wednesday, June 17, 2026 12:33 PM
To: [email protected]
Cc: Ray Walters <[email protected]>
Subject: Re: [RE-wrenches] Solar One HUP batteries

 

We were a distributor for the HUP Solar One for almost 2 decades.  Enersys, the parent company, decided to pull the plug on the entire HUP line, due to reduced demand for lead acid batteries, and then the 2025 Tariffs were the final blow. We were told to pull all advertising, and mention of what was a great battery.  I don't know what to say about a replacement cell, other than to contact Enersys directly and try to work through the chain of command.  

Tommy retired with that, so is no longer a contact point, and I really don't have anything to offer either.  A bad cell is highly unusual with the HUPs, I only saw that on a system where the owners were not able to get to one of the cells, and so it went dry.  I've recovered cells by charging them vigorously with a large automotive charger set to 6 v, and just put that across the terminals of the individual cell while charging the whole system as well.  

Also, the HUPs need a pretty high charge rate to bring the cells to full SG. Depends on the model, but the minimum charge rate can be as high as 200 amps for the largest model.  I've attached a spec sheet with minimum charge rates listed.  Basically if you aren't getting close to those charge rates, you can end up with sulfation damage long term.  I've almost always been able to recover HUPs, but it might take 2 days of EQing at very high voltages (62 v @ 48v nominal) nothing will happen, and then finally the SG will start moving.  

Ray Walters
Remote Solar

On 6/17/2026 11:59 AM, Dana Orzel via RE-wrenches wrote:

Chris I am on the Solar One If no reply let em know I can dive into my battery box & look at ID & Data

 

 

_________________________________________________________

Dana Orzel                GREAT SOLAR WORKS!                      

C – 208.721.7003      E – [email protected]

W - www. greatsolarworks.com     www.solarwork.com

“Responsible Technologies for Responsible People since 1988!”

 



_______________________________________________
List sponsored by Redwood Alliance
 
Pay optional member dues here: http://re-wrenches.org
 
List Address: [email protected]
 
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
 
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
 
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
 
Check out or update participant bios:
http://www.members.re-wrenches.org
 
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to