It seems impossible to get detailed info from Grundfos or anywhere else
about this submersible pump (11-SQF-2) I'm trying to troubleshoot, still
in the well. I'm getting 1.4 ohms from the two leads going to the pump,
zero ohms ground wire to each lead. 1.4 ohms sounds like a short to me,
anybody know the spec for the motor windings? The pump has been in the
hole for 15 years solar only with a CU200, apparently they don't make
this pump or controller anymore. Would love some ideas for a replacement.
Thanks,
Bill
Feather River Solar Electric
Bill Battagin, owner
4291 Nelson St. (Shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA 95983
530-284-7849, 258-1641(cell)
CA. C10 Lic # 874049
Solar Powered since 1982
Home of the Sunny Side Up
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
