On 9/14/06, Marc <
[EMAIL PROTECTED]> wrote:
I can't seem to figure out how to create a Google Code project. I have a
gmail login I think... What is my clickpath to create a new project?
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto: [EMAIL PROTECTED]] On Behalf Of Matt Williams
> Sent: Thursday, September 14, 2006 5:02 PM
> To: [email protected]
> Subject: Re: [Reactor for CF] CF7/fusebox5/reactor/flex2
>
> 2 thoughts:
> cfPetMarket - a place for the same app in different frameworks.
> Google Code - instead of posting code to the list, get
> a repository of some sort, especially if more than 1
> person will be working on it.
>
> On 9/14/06, Scott Krebs < [EMAIL PROTECTED]> wrote:
> >
> >
> > To expand on that for those not aware of it, Sean's
> examples can be
> > found at http://www.corfield.org/blog/index.cfm,
> check out Frameworks
> > Sample Code and Persistence Sample Code in the
> Software pod on the top
> > right. There are many examples and the readme files
> explain what's
> > what. Reactor sample code is in the Persistence download.
> >
> > Scott
> >
> > ________________________________
> >
> > From: [EMAIL PROTECTED]
> [mailto: [EMAIL PROTECTED]]
> > On Behalf Of Teddy Payne
> > Sent: Thursday, September 14, 2006 3:53 PM
> >
> > To: [email protected]
> > Subject: Re: [Reactor for CF] CF7/fusebox5/reactor/flex2
> >
> >
> > Actually, this would be the first effort of its type.
> Good code
> > samples for stepping stones for various frameworks
> would probably be a
> > very sought after site.
> >
> > You could have the creators of each framework, except
> for Flex,
> > contribute the solutions on an as per need basis.
> >
> > Sean C. does this, but I am not sure how many
> frameworks he provides
> > samples for.
> >
> > Teddy
> >
> >
> > On 9/14/06, Marc < [EMAIL PROTECTED]> wrote:
> > >
> > >
> > > That's a nice pattern diagram, and I will in fact
> be digging in hard
> > > to
> > figure it out. But in the meantime, it would be
> helpful to actually
> > build the simplest of apps - one that can take a
> Person, for example,
> > and allow a Person object to be CRUD'ed using BOTH
> flex and fusebox
> > apps, with reactor as the persistence for both, with
> little or no redundancy in the code.
> > >
> > > While this diagram is helpful for the more advanced
> users, I think
> > > at this
> > point a simpler diagram with actual code examples in
> the technology
> > relevant to CF and Reactor would be more helpful to
> newer users. A
> > "starter" course, so to speak. It's nice to know
> this diagram is out
> > there, and is acting as the basis for the goals of
> our CF-based frameworks!
> > >
> > >
> > > ________________________________
> > From: [EMAIL PROTECTED]
> [mailto: [EMAIL PROTECTED]]
> > On Behalf Of Teddy Payne
> > > Sent: Thursday, September 14, 2006 3:00 PM
> > >
> > > To: [email protected]
> > > Subject: Re: [Reactor for CF] CF7/fusebox5/reactor/flex2
> > >
> > >
> > >
> > > Best practices?
> >
> http://java.sun.com/blueprints/corej2eepatterns/Patterns
> /index.html
> > >
> > > The image map provides a road map to a J2EE
> application which most
> > frameworks are trying to achieve through CF.
> > >
> > > Teddy
> > >
> > >
> > > On 9/14/06, Marc <[EMAIL PROTECTED]> wrote:
> > > > Thanks Tom, Peter, et al:
> > > >
> > > > In the interests of my own education as well as
> for the benefit of
> > > > the community, I'd like to put together a sample set of
> > > > applications that demonstrate what you are describing.
> > > > Architecture-level 'best
> > practices' in
> > > > this area are hard to come by on the 'net, let
> alone actual sample code.
> > > >
> > > > If it's okay with everyone, I'd like to post code
> into this
> > > > thread, and
> > get
> > > > feedback from everyone. Since this is very much
> an integration of
> > Reactor
> > > > with two other frameworks (let alone coldSpring,
> which I'm afraid
> > > > to
> > even
> > > > start with), it seems relevant to have this
> discussion here.
> > > >
> > > > Would anyone object? Would anyone like to
> contribute sample code?
> > Should I
> > > > shut up and go away? ;)
> > > >
> > > > > -----Original Message-----
> > > > > From: [EMAIL PROTECTED]
> > > > > [mailto: [EMAIL PROTECTED]] On
> Behalf Of Tom Chiverton
> > > > > Sent: Thursday, September 14, 2006 11:57 AM
> > > > > To: [email protected]
> > > > > Subject: Re: [Reactor for CF]
> CF7/fusebox5/reactor/flex2
> > > > >
> > > > > On Thursday 14 September 2006 16:14, Marc wrote:
> > > > > > Does anyone else here have a similar
> situation, or
> > > > > has worked on a
> > > > > > similar situaiton in the past?
> > > > >
> > > > > What you are aiming to build is a 'service layer'.
> > > > > Which I really must draw and blog about more, but:
> > > > >
> > > > > Service layer
> > > > > |
> > > > > V
> > > > > Business methods ('managers')
> > > > > |
> > > > > V
> > > > > Data service Layer (Reactor)
> > > > >
> > > > > Our services pull managers out of an
> application-wide
> > > > > ColdSpring factory.
> > > > > Managers may call on other managers which
> are injected
> > > > > by ColdSpring, along with a Reactor Factory.
> > > > >
> > > > > Services are independent of each other.
> Services return
> > > > > simple (no methods) transfer objects and
> are the only
> > > > > parts with access='remote' methods.
> > > > > Services marshal internal (CFC) objects into a
> > > > > normalised form and exposed a more or less
> > > > > obvious/static API, made up of simple types and
> > > > > transfer objects, and a client should
> only have to make
> > > > > one call to a service to archive one task.
> > > > >
> > > > > Business methods hold all your logic about how to
> > > > > actually do the things the client asked
> the service to
> > > > > do i.e . update the database via the Data
> service layer,
> > > > > send a notification and then update
> something else.
> > > > >
> > > > > Data services abstract the underlying
> storage method
> > > > > (Reactor) for the main application.
> > > > >
> > > > > Each layer should be separate and
> isolated for the one
> > > > > below - ColdSpring again.
> > > > >
> > > > > Weather it is Flex via CFC remoting,
> Apollo via web
> > > > > services or a CFML page via cfcomponent,
> everything
> > > > > talks to the service to get stuff done.
> > > > > --
> > > > > Tom Chiverton, I hope the attachment
> comes through and
> > > > > helps Helping to carefully
> disintermediate transparent clusters
> > > > >
> > > > >
> > > > >
> > ****************************************************
> > > > >
> > > > > This email is sent for and on behalf of
> Halliwells LLP.
> > > > >
> > > > > Halliwells LLP is a limited liability partnership
> > > > > registered in England and Wales under
> registered number
> > > > > OC307980 whose registered office address is at St
> > > > > James's Court Brown Street Manchester M2
> 2JF. A list
> > > > > of members is available for inspection at the
> > > > > registered office. Any reference to a partner in
> > > > > relation to Halliwells LLP means a member
> of Halliwells
> > > > > LLP. Regulated by the Law Society.
> > > > >
> > > > > CONFIDENTIALITY
> > > > >
> > > > > This email is intended only for the use of the
> > > > > addressee named above and may be confidential or
> > > > > legally privileged. If you are not the
> addressee you
> > > > > must not read it and must not use any information
> > > > > contained in nor copy it nor inform any
> person other
> > > > > than Halliwells LLP or the addressee of
> its existence
> > > > > or contents. If you have received this
> email in error
> > > > > please delete it and notify Halliwells LLP IT
> > > > > Department on 0870 365 8008.
> > > > >
> > > > > For more information about Halliwells LLP visit
> > > > > www.halliwells.com.
> > > > >
> > > > >
> > > > > -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- --
> > > > > -- -- -- -- -- -- -- -- -- Reactor for ColdFusion
> > > > > Mailing List [email protected] Archives at:
> > > > >
> > http://www.mail-archive.com/reactor%40doughughes.net/
> > > > > -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- --
> > > > > -- -- -- -- -- -- -- -- --
> > > >
> > > >
> > > >
> > > > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- -- --
> > > > -- --
> > -- -- --
> > > > Reactor for ColdFusion Mailing List
> [email protected]
> > > > Archives at:
> > http://www.mail-archive.com/reactor%40doughughes.net/
> > > > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- -- --
> > > > -- --
> > -- -- --
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > <cf_payne />
> > >
> > > Blog: http://cfpayne.wordpress.com/
> > > Atlanta CFUG: http://www.acfug.org
> > > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- -- --
> > > -- --
> > -- --
> > > Reactor for ColdFusion Mailing List
> > > [email protected]
> > > Archives at:
> > http://www.mail-archive.com/reactor%40doughughes.net/
> > > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- -- --
> > > -- --
> > -- --
> > > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- -- --
> > > -- --
> > -- --
> > >
> > > Reactor for ColdFusion Mailing List
> > > [email protected]
> > > Archives at:
> > http://www.mail-archive.com/reactor%40doughughes.net/
> > > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- -- --
> > > -- --
> > -- --
> >
> >
> >
> > --
> > <cf_payne />
> >
> > Blog: http://cfpayne.wordpress.com/
> > Atlanta CFUG: http://www.acfug.org
> > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- --
> > -- --
> > -- --
> > Reactor for ColdFusion Mailing List
> > [email protected]
> > Archives at:
> > http://www.mail-archive.com/reactor%40doughughes.net/
> > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- --
> > -- --
> > -- --
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.1.405 / Virus Database: 268.12.3/447 -
> Release Date:
> > 9/13/2006
> >
> >
> >
> > --
> > No virus found in this outgoing message.
> > Checked by AVG Free Edition.
> > Version: 7.1.405 / Virus Database: 268.12.3/447 -
> Release Date:
> > 9/13/2006
> >
> > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- --
> > -- --
> > -- --
> >
> > Reactor for ColdFusion Mailing List
> > [email protected]
> > Archives at:
> > http://www.mail-archive.com/reactor%40doughughes.net/
> > -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- --
> > -- --
> > -- --
>
>
> --
> Matt Williams
> "It's the question that drives us."
>
>
> -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- -- -- -- -- --
> Reactor for ColdFusion Mailing List
> [email protected]
> Archives at:
> http://www.mail-archive.com/reactor%40doughughes.net/
> -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> -- -- -- -- -- -- -- -- --
>
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Reactor for ColdFusion Mailing List
[email protected]
Archives at: http://www.mail-archive.com/reactor%40doughughes.net/
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
--
"Come to the edge, he said. They said: We are afraid. Come to the edge, he said. They came. He pushed them and they flew."
Guillaume Apollinaire quotes
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Reactor for ColdFusion Mailing List
[email protected]
Archives at: http://www.mail-archive.com/reactor%40doughughes.net/
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
