On 2007-01-24, at 17:41, Dennis Birch wrote:
Does anybody know if there is a report in the feedback system on
this issue?
My efforts to find one didn't turn one up.
Nope, I don't think so, only the TMP files, there is some old ..
http://www.realsoftware.com/feedback/viewreport.php?reportid=whvvqami
Sven E
I'm seeing the same problem here, and I assume most RB users are.
Let's make
sure it's properly documented in the feedback system so that RS
engineers
will have it documented.
On 1/24/07, Mathieu Langlois <[EMAIL PROTECTED]> wrote:
Same problem here, with same configuration. So far, I've learned to
live with it until they fix it, hopefully sooner than later.
Math
On 1/24/07, Guillermo Z <[EMAIL PROTECTED]> wrote:
> I have a large project and after few hours of compile/debug
cycles the
> IDE eats 1GB of memory !!
>
> If I close the project the IDE still consumes 900MB without any
> project open !!! the only solution is to quit RB and reopen it.
>
> When I open the project the IDE consumes 182MB, after the first
> compile 452MB !!! after I lose about 30MB in each compile.
>
> I think that is not a problem of my project and that any project
have
> the same problem but the lose memory is proportional to the project
> size and complexity,
>
> I have a iMac intel with 2GB of RAM, RB 2007r1.
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
