Lista de Discuss�o Rede Wan - http://www.networkdesigners.com.br
Parece que o problema principal � que voc� tem icmp
inactive, isso � ping.
Da outra ponta voc� consegue telnetar no cyclades?
Caso n�o, arruma a rota est�tica do outro lado tamb�m.
[]s
Doc
--- [EMAIL PROTECTED] wrote:
> Lista de Discuss�o Rede Wan -
> http://www.networkdesigners.com.br
>
> Amigos da Lista,
> Recorro mais uma vez a todos que puderem ajudar
> a resolver um problema
> de configura��o Frame-Relay no router Cyclades, sei
> que � apenas um
> pequeno detalhe, a� vai:
>
> O router da
> ponta "A" � um IBM 2210-24E e da ponta "B" e o
> PR-3000 da Cyclades, ambos
> com rotas est�ticas apontando para as interfaces
> seriais. Consigo dar
> telnet no router da ponta "B" somente a partir do
> router da ponta "A"
> ,coloquei apenas a rota default, mas nao tenho rota
> de volta, pois n�o
> consigo pingar nenhum site. Segue abaixo a
> configura��o do router Cyclades.
> Desde j� agrade�o a todos. Obrigado!.
>
> Ethernet
>
> Encapsulation Ethernet
> MAC address 00:60:2E:00:00:01
> IP protocol active
> Interface Numbered
> Primary IP address 200.xx.xx.xxx
> Subnet mask 255.255.255.224
> NAT - Address Scope Global
> ICMP Port inactive
> Incoming Filter List None
> Detailed Incoming IP Accounting Process ( (A)ctive
> or (I)nactive ) inactive
> Outgoing Filter List None
> Detailed Outgoing IP Accounting Process ( (A)ctive
> or (I)nactive ) inactive
> Interface Transparent Bridge Inactive
> Proxy ARP inactive
> Bandwidth 0
> IP Traffic Control List None
>
> slot 1 (ZBUS)
> ZBUS card not configured
>
> slot 2 (SWAN)
> Channel 1
> Encapsulation Frame Relay
> IP protocol active
> Interface Numbered
> Primary IP address 10.1.1.54
> Subnet mask 255.255.255.252
> NAT - Address Scope Global
> ICMP Port inactive
> Incoming Filter List None
> Detailed Incoming IP Accounting Process ( (A)ctive
> or (I)nactive ) inactive
> Outgoing Filter List None
> Detailed Outgoing IP Accounting Process ( (A)ctive
> or (I)nactive ) inactive
> Interface Transparent Bridge Inactive
> Sync mode
> External Clock Source
> Interface V.35
> Bandwidth 64
> IP Traffic Control List None
> SNAP IP inactive
> LMI type ANSI
> T391 in seconds 10
> N391 6
> N392 3
> N393 4
> CIR 48
>
> Number of DLCI's 1
> Frame Relay MAP
> -----------------------------------
> Nb DLCI Remote IP addr Predictor
> -----------------------------------
> 01 16 10.1.1.53 Disabled
> -----------------------------------
>
> DLCI Traffic Control inactive
>
>
> slot 3 (SWAN)
> slot 3 (SWAN) inactive
>
> Username Table
> Username Status Type Host 01
> Host 02 Host 03 Host
> 04
>
> super Enabled super
> rede Enabled super
>
> Rules Lists
>
> Rule List Name Rule Default List
> Linked
> Status Scope Type
> Rule List
>
> NAT Global Adresses None
>
> NAT Local Adresses None
>
> NAT Static Translation Table None
>
> UDP Timeout (min) 5
> DNS Timeout (min) 1
> TCP Timeout (min) 1440
> TCP flags Timeout (min) 1
> Port map translation Enabled
>
> Radius inactive
>
> No Radius Server Configured
>
> Tacacs inactive
>
> No Tacacs Server Configured
>
> Default Usr Menu Itens
> 1. Telnet 2. Ping 3. Traceroute 4. PPP
>
> No LAN IP Backup address configured
>
> VPN is not available.
>
> IP Static Routes
>
> Destination Subnet Mask Gateway/Interface
> Metric/Backup
> OSPF/ExType
>
> Default Gateway 10.1.1.54
> 1/no no
>
> Multilink Circuit number 1
> Criteria for traffic distribution Optimal
> Bandwith limits (upper / lower) Load Backup disabled
> Number of interfaces configured 0
>
> DNS Client Status inactive
>
> TCP Ports
> X25 Socket port range 32001 to 32064
> Terminal Socket port range 31001 to 31064
> Remote Telnet port range 30001 to 30064
> Printer port range 180 to 9999
>
> Delay Time to Route DHCP Messages 4
>
> No DHCP Servers Configured.
>
> Default Router Ip Address for Applications 0.0.0.0
>
> OSPF Global Parameters
> OSPF protocol inactive
>
> OSPF Area Parameters
> Area created none
>
> OSPF Neighbor's Parameters
> Neighbor enabled none
>
> OSPF Vitual Links
> Virtual interface enabled none
>
> Transparent Bridge inactive
>
>
______________________________________________________________________
> To unsubscribe, write to
[EMAIL PROTECTED]
=====
Doc
[EMAIL PROTECTED]
Moderador da [EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
______________________________________________________________________
To unsubscribe, write to [EMAIL PROTECTED]
