Lista de Discuss�o Rede Wan - http://www.networkdesigners.com.br Amigos da Lista, Recorro mais uma vez a todos que puderem ajudar a resolver um problema de configura��o Frame-Relay no router Cyclades, sei que � apenas um pequeno detalhe, a� vai: O router da ponta "A" � um IBM 2210-24E e da ponta "B" e o PR-3000 da Cyclades, ambos com rotas est�ticas apontando para as interfaces seriais. Consigo dar telnet no router da ponta "B" somente a partir do router da ponta "A" ,coloquei apenas a rota default, mas nao tenho rota de volta, pois n�o consigo pingar nenhum site. Segue abaixo a configura��o do router Cyclades. Desde j� agrade�o a todos. Obrigado!. Ethernet Encapsulation Ethernet MAC address 00:60:2E:00:00:01 IP protocol active Interface Numbered Primary IP address 200.xx.xx.xxx Subnet mask 255.255.255.224 NAT - Address Scope Global ICMP Port inactive Incoming Filter List None Detailed Incoming IP Accounting Process ( (A)ctive or (I)nactive ) inactive Outgoing Filter List None Detailed Outgoing IP Accounting Process ( (A)ctive or (I)nactive ) inactive Interface Transparent Bridge Inactive Proxy ARP inactive Bandwidth 0 IP Traffic Control List None slot 1 (ZBUS) ZBUS card not configured slot 2 (SWAN) Channel 1 Encapsulation Frame Relay IP protocol active Interface Numbered Primary IP address 10.1.1.54 Subnet mask 255.255.255.252 NAT - Address Scope Global ICMP Port inactive Incoming Filter List None Detailed Incoming IP Accounting Process ( (A)ctive or (I)nactive ) inactive Outgoing Filter List None Detailed Outgoing IP Accounting Process ( (A)ctive or (I)nactive ) inactive Interface Transparent Bridge Inactive Sync mode External Clock Source Interface V.35 Bandwidth 64 IP Traffic Control List None SNAP IP inactive LMI type ANSI T391 in seconds 10 N391 6 N392 3 N393 4 CIR 48 Number of DLCI's 1 Frame Relay MAP ----------------------------------- Nb DLCI Remote IP addr Predictor ----------------------------------- 01 16 10.1.1.53 Disabled ----------------------------------- DLCI Traffic Control inactive slot 3 (SWAN) slot 3 (SWAN) inactive Username Table Username Status Type Host 01 Host 02 Host 03 Host 04 super Enabled super rede Enabled super Rules Lists Rule List Name Rule Default List Linked Status Scope Type Rule List NAT Global Adresses None NAT Local Adresses None NAT Static Translation Table None UDP Timeout (min) 5 DNS Timeout (min) 1 TCP Timeout (min) 1440 TCP flags Timeout (min) 1 Port map translation Enabled Radius inactive No Radius Server Configured Tacacs inactive No Tacacs Server Configured Default Usr Menu Itens 1. Telnet 2. Ping 3. Traceroute 4. PPP No LAN IP Backup address configured VPN is not available. IP Static Routes Destination Subnet Mask Gateway/Interface Metric/Backup OSPF/ExType Default Gateway 10.1.1.54 1/no no Multilink Circuit number 1 Criteria for traffic distribution Optimal Bandwith limits (upper / lower) Load Backup disabled Number of interfaces configured 0 DNS Client Status inactive TCP Ports X25 Socket port range 32001 to 32064 Terminal Socket port range 31001 to 31064 Remote Telnet port range 30001 to 30064 Printer port range 180 to 9999 Delay Time to Route DHCP Messages 4 No DHCP Servers Configured. Default Router Ip Address for Applications 0.0.0.0 OSPF Global Parameters OSPF protocol inactive OSPF Area Parameters Area created none OSPF Neighbor's Parameters Neighbor enabled none OSPF Vitual Links Virtual interface enabled none Transparent Bridge inactive ______________________________________________________________________ To unsubscribe, write to [EMAIL PROTECTED]
