Hello:
Would anyone happen to know what the correct module and ports are to allow
Starcraft to work from Windows 95/98 via IP Masquerading? Also, would
anyone know what the common ports are for the other IP Masquerading
modules? (cuseeme, raudio, etc.)
Thanks
On Thu, 30 Apr 1998, Dan Cyr wrote:
> At 06:39 PM 4/30/1998 -0400, Jake Colman wrote:
> >>>>>> "Dan" == Dan Cyr <[EMAIL PROTECTED]> writes:
> >
> >
> > Dan> Add this to /etc/rc.d/rc.local
> >
> > Dan> ipfwadm -F -a deny
>
> ipfwadm is the tool, -F means it's a forwarding rule, -a means add a rule,
> deny means deny everything from/tp everywhere..
>
> >ipfwadm -F -a m -S 192.168.0.0/24 -D 0.0.0.0/0
>
>
> again the tool, -F same as above, -a same as above, m mens masquerade, -S I
> don't know but it's in the IP Masq mini howto =), 192.168.0.0/24 means
> masquerade your subnet, -D means data, 0.0.0.0/0 means forward it to the
> assigned subnet from anywhere (or something like that).
>
> >
> > Dan> insmod ip_masq_ftp ports=21,20,69 insmod ip_masq_irc
> > Dan> ports=6666,6667,6669,6668,7000
>
> These are modules that you must load into the kernel along with the ports
> you can use through the IP Masq'd interface (ppp?) One is so you can use
> IRC (internet relay chat) and the other is so you can use FTP (file
> transfer protocol).
>
> >
> >What do these settings do specifically?
> >
> > >> I turned on IPV4 forwarding since I read that as a requirement on
> this
> > >> list.
> >
> > Dan> Once you have recompiled and installed this kernel ipv4 forwarding
> > Dan> will be on. You won't need to turn it on anymore.
> >
> >I assume that the recent 2.0 series of kernels (the one supplied with RH 5)
> >support IP Masquerade? I don't need to move to a 2.1 series kernel? What
> does
>
> Nope. They only have the bare necessities in there to run your system. The
> normal thing to do is to recompile a new kernel after your finished a fresh
> install, to include drivers for your own hardware, add in patchs to fix
> exploits, etc...
>
> Go download from ftp.kernel.org linux-2.0.33.tar.gz and copy it to /usr/src
> Also get http://www.linuxhelp.org/syndrop_2.0.33_acox.patch
>
> cd /usr/src
> rm linux
> tar zvxf linux-2.0.33.tar.gz
> mv linux linux-2.0.33
> ln -s linux-2.0.33 linux
> cp syndrop_2.0.33_acox.patch linux/net/ipv4
> cd linux/net/ipv4
> patch -p0 < syndrop_2.0.33_acox.patch
> cd ../../..
> make menuconfig
> change some shit
> make dep ; make clean
> make zImage
> cp arch/i386/boot/zImage /boot/vmlinuz33
>
> Then go and edit your /etc/lilo.conf
> Make sure you leave the old bootable kernel in there in case the new one
> craps out.
>
> eg. /etc/lilo.conf before the change
>
> boot=/dev/hda
> map=/boot/map
> install=/boot/boot.b
> prompt
> timeout=50
> other=/dev/hda1
> label=dos
> table=/dev/hda
> image=/boot/vmlinuz
> label=linux
> root=/dev/hdb1
> initrd=/boot/initrd
> read-only
>
>
> Now after your change.
>
> boot=/dev/hda
> map=/boot/map
> install=/boot/boot.b
> prompt
> timeout=50
> other=/dev/hda1
> label=dos
> table=/dev/hda
> image=/boot/vmlinuz
> label=linux
> root=/dev/hdb1
> initrd=/boot/initrd
> read-only
> image=/boot/vmlinuz33
> label=linux33
> root=/dev/hdb1
> initrd=/boot/initrd
> read-only
>
>
> After that is done, save the file and run /sbin/lilo and when you reboot,
> at the LILO prompt type in linux33
> This will fix you up nicely.
>
> Please don't ask me to explain what this all means. Go read the
> kernel-howto and the lilo-howto and the ip-masq-mini-howto. It's all right
> on those documents.
>
> Good Luck.
>
>
> Dan
>
> >IPV4 forwarding do when used independently of the other changes you are
> having
> >me do?
> >
> >
> >--
> >Jake Colman
> >
> >Principia Partners LLC Phone: (201) 946-0300
> >Harborside Financial Center Fax: (201) 946-0320
> >902 Plaza II Beeper: (800) 505-2795
> >Jersey City, NJ 07311 E-mail: [EMAIL PROTECTED]
> > E-mail: [EMAIL PROTECTED]
> > web: http://www.ppllc.com
> >
> >
> >--
> > PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> >http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> > To unsubscribe: mail [EMAIL PROTECTED] with
> > "unsubscribe" as the Subject.
> >
>
>
> --
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
