At 07:41 PM 2/9/00 -0500, John F. Moore wrote:
>Hello
>
>I would like to know how to backup my laptop computer to my desktop
>computer using a Null Modem and a serial connection. I want to store
>the contents of the laptop's hard disk on the tape drive of the
>desktop.
>
>The desktop is running Redhat 6.1 with a tape drive on /dev/st0. The
>laptop is Redhat 5.0. I transfer files from machine to machine using
>a null modem cable and kermit on both ends. I am not concerned with
>speed, but I want some method for transfering the entire contents of
>the laptop's contents onto the tape drive of the desktop. I am not
>concerned with speed, so transfers over 115200 Baud lines are OK.
>
>I have a 10base-2 network on the desktop, but no network card in the
>laptop. I don't think I could use a network card since they don't
>have 10base-2 (coax) PCMCIA cards for the laptop.
>
>John
>
>
Here are a couple of ideas. You can set up a PPP connection over the
serial port, or a PLIP using your parallel ports for a faster connection.
Or you can get a hub with a 10base2 uplink port, and use 10baseT to your
laptop.
I leave it to more knowledgeable people on the list on the best way to
do the backup after you have the network connection.
Mikkel
Do not meddle in the affairs of dragons,
for you are crunchy and taste good with ketchup.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.