I bought another identical LNE100TX and installed it. Now I have my masq up
and running (yea!), but occasionally I'll get some errors.
Jan 19 16:30:14 tenchi kernel: martian source 040ba8c0 for 010ba8c0, dev
eth0
Jan 19 16:30:14 tenchi kernel: ll header: ff ff ff ff ff ff 00 60 97 0f 08
3f 08 06
and
SIOCADDRT: Network not reachable (only on internal card)
What are these messages and what do they mean?
Drew
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jack Bowling
Sent: Monday, January 15, 2001 10:58 PM
To: [EMAIL PROTECTED]
Subject: Re: Ethernet driver woes
On Mon, 15 Jan 2001, Drew Hunt wrote:
<snip>
> So, finally, my question is: How do I get these tulip-based cards to work
on
> the same machine? Any suggestions are appreciated.
<snip>
I also had LNE100 problems until I did the following:
- upgraded to kernel 2.2.18 (and now 2.4.0) since the stock tulip drivers in
the newer builds seem to work just as well as Don Becker's tandem
pci-scan/tulip drivers.
- LNEs didn't play nice with other NICs for me, but since I made every NIC
in my boxes an LNE100 and went with a Linksys hub, everything has been
working perfectly.
--
Jack Bowling
mailto: [EMAIL PROTECTED]
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
