On Sun, 29 Apr 2001, Travis Ryan wrote:
> Hello,
> I have a DSL connection with two static IPs. I can connect fine with my
> Win98 machine, but cannot get my Linux machine to ping anything outside my
> hub. I have had the same physical layer setup as before as far as cabling
> and the hub connected to the DSL modem. I can ping between both my win98 and
> Linux box fine, but cannot ping anything else including the gateway and the
> nameservers. I did have this working before I decided to wipe the machine
> and install the new Seawolf 7.1. Now can't evidently get it configured the
> same again. I can even access my Linux boxes telnet and ftp server daemons
> from my win98 machine internally. Can anyone give me some insight as to what
> might be my problem? Or give me some sample config file examples, I've tried
> the format of many other ones found already. Such as using the GUI netcfg
> prog, to the resolv.conf, route prog, ifconfig stuff, etc. HELP!! THanks!
>
> TRavis
>
>
Do you have a route to your gateway defined, and do you specify the
gateway? The output of "route -n" and
"cat /etc/sysconfig/network-scripts/ifcfg-eth0" would be helpfull.
Also knowing the IP of your gateway would be nice.
Once the routing is set up correctly, then we can work on setting up
/etc/resolv.conf.
Mikkel
--
Do not meddle in the affairs of dragons,
for you are crunchy and taste good with ketchup.
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
