The older ones did have some problems like that as I have one of each now.
after the last flood my good one got real wet and had to send it in for a
check up. Neptune has or did have an upgrade price if you call them and the
newer ones are better.
call Curt at Neptune.
jp
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Shane Clays
Sent: Wednesday, January 10, 2001 6:08 AM
To: '[EMAIL PROTECTED]'
Subject: RE: Probes and stuff...
Hi Jerry. It is an older one. I actually got it used, for a great price...
when I got it, there was no ORP. Now I guess I know why....
Any thoughts?
Thanks,
Shane
-----Original Message-----
From: Jerry Porter [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, January 09, 2001 5:31 PM
To: [EMAIL PROTECTED]
Subject: RE: Probes and stuff...
Do you have an older modle or one of the newer ones.
jp
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Shane Clays
Sent: Tuesday, January 09, 2001 10:30 AM
To: '[EMAIL PROTECTED]'
Subject: Probes and stuff...
Hi everyone. I remember a thread going around a while ago, but do
not
remember if there was any resolution so I am going to ask again...
Last week, I got a new ORP probe for my Neptune. So I go home all
happy that
I am now going to be able to monitor my ORP. So, I plug it in and
while I am
waiting for it to reach equilibrium, I go about doing a couple of
mainanence
chores with the tank. Well, about 3 minutes later when I look back
at the
Neptune display, my ORP is 114 and my pH is 7.2. Not sure, but I
think with
that, all of my animals should have been dead. So, I unplugged the
ORP
probe and when I did so, the pH reading immediately came up to 7.9
(normal
for me). When I plugged the ORP back in, down went pH reading.
Then I unplugged the pH probe, and the ORP went up. So, basically,
is what
happens is when both plugs are plugged in, both readings are very
low, but
if I unplug either of them, then the reading of the other goes to
normal.
Does anyone have any suggestions or reasons why this happens and any
suggestions on how to get both probes working correctly??
TIA
Shane C.
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from
the list.
The list manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list.
The list manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list.
The list manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
