Joe,
Thanks for the reply...
Are you saying you rested the spay bar on 1/2" pvc to hold the spray bar
above the sand bed????
Steve
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Aquaman
Sent: Saturday, January 13, 2001 11:35 AM
To: [EMAIL PROTECTED]
Subject: Re: Spray Bars Behind Rock
Steve, I just upgraded to a 72G tank. In the 55G a had the spray bar with
hole evry inch, some holes pointing to the rocks some tothe front of the
tank the problem is that if yo have sand it gets into some of the holes
clogging them so with the upgrade I place the spraybar on top of1/2" pvc
which was cut 1/2" wide then placed sideways then I siliconed the void in
front and the back to keep detritus from settleing behind the spraybar so
far so good. Joe
SNIP
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
