I use mag pumps on my tank and love them. No problems at all and you can
use them in line or submerged. I use a mag 7 as a return on my 125 and a
mag 3 attached to a sprinkler head in the tank to create movement. I think
tomorrow that am going to buy a mag 9 for a return and switch the 7 to my
skimmer. As a side note, does anyone think that using the mag 7 on a 6
foot high 4 inch diameter skimmer would be too much? I am currently using a
rio 2500 to run the skimmer. It does run through a chiller before it gets
to the skimmer.
Ben
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 31, 2001 7:38 PM
Subject: Mag pumps
> Looking for a pump to use as a return. Going to put a sump on my 30
gallon.
> Will use an Amiracle overflow thats 600gph. Looking at a mag pump thats
like
> 550gph at 3 feet of head. Anyone use these pumps? reliable. Was also
looking
> at the iwaki 30rlt or whatnot. But its a bit exspensive. But ill go with
the
> iwaki if it will be less headaches and cash in the long run.
> ________________________________________
>
> LEAVING THE LIST
> ================
> To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list.
The list manager controls who belongs to the list.
>
> For example:
> --------------------------------------------------------------
> From: John Doe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: <not needed>
>
> UNSUBSCRIBE
> --------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
