I didnt see a web site. The guy who suggested it is the owner of
Candybass.com. I just used 1/2 pvc for the legs and 3/4 for the horizontal
pieces. I did this because there was a fitting that is like a 90 degree elbow
with another 1/2 threaded fitting coming from the side. So the 90 degree
elbow lays horizontally and the 1/2 fitting goes downward. I also have 2 3/4
sections connected with Ts that go front to back. Which is where i mounted
the lights too. Not considering my horrible cutting skills and measuring It
looks fairly descent. I then used some velcro and black canvas cloth to cover
the pvc frame. The legs didnt really fit the way i planned. So i just forced
them to sit down inside on the inner lip. Which actually makes it really
stable. Its almost a pain to take off. IF you want pics. ill try to get some
and email them to you..
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
