I wouldn't use a rio, even if it was a rio 10,000. They do not last, and
they do not produce the "pressure" necessary to do a good job with your
skimmer. I used a rio 3100 and it did not do the job. Go with a mag drive.
They are dependable, and submersible.

IMO
Shane C.

        -----Original Message-----
        From:   Jose Arturo Perez Vera [SMTP:[EMAIL PROTECTED]]
        Sent:   Thursday, June 07, 2001 1:54 PM
        To:     [EMAIL PROTECTED]
        Subject:        RE: Better skimmer please !!!

        what about a RIO 3100? 

        Thanks ! 

        Reef Man 
        ICQ # 21731316 
        ((�>`�.��.���`�.. ><((((�>`�.��.���`�.�><((((�> 
        ><((((�>`�.��.���`�.�.���`�...�><((((�>��.���`�.�. 
        `�.. ><((((�>`�.��.���`�.�><((((�>��.���`�.�. 




        -----Mensaje original----- 
        De: Itamar Gottardello De Rocha 
        [ mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> ] 
        Enviado el: Thursday, June 07, 2001 3:43 PM 
        Para: [EMAIL PROTECTED] 
        Asunto: Re: Better skimmer please !!! 


        Shane : 
        The rio pump has great output,but low pressure to run a Berlim's
venturi.If 
        the mag 7 have the same output,the pressure is higher than a Rio . 
        To run venturis how many GPH isn't so important than the pressure. 
        Regards 
        Itamar 
        ----- Original Message ----- 
        From: "Shane Clays" <[EMAIL PROTECTED]> 
        To: <[EMAIL PROTECTED]> 
        Sent: Thursday, June 07, 2001 5:31 PM 
        Subject: RE: Better skimmer please !!! 


        Quite honestly, I don't know what the rating of those compared to
the Rio 
        is. I would compare the GPH of the rio to that of the mags, then get
a mag 
        that is 2or 3 sizes up from that of the rio. Another words, if the
Rio pumps 
        1000 GPH and the Mag 7 pumps 1000 GPH, go with the mag 9. Either
that, or 
        take the max flow rating on the skimmer (out of the owners manual)
and then 
        get a pump that pumps a lot more than that, then put the ball valve
on it 
        and you can then adjust according. Sorry I cant help more, but I run
my 
        berlin skimmer off of my Iwaki 700 rlt pump, and I have no idea
exactly how 
        many GPH I have running through the skimmer. I only know it is a lot
more 
        than the rio I had was pumping. 

        Shane 

        -----Original Message----- 
        From: Jose Arturo Perez Vera [SMTP:[EMAIL PROTECTED]] 
        Sent: Thursday, June 07, 2001 1:28 PM 
        To: [EMAIL PROTECTED] 
        Subject: RE: Better skimmer please !!! 

        Thanks Shane ! 
        do you think the correct size pump is a Mag 7 or 9? 

        thanks ! 

        Reef Man 
        ICQ # 21731316 
        ((�>`�.��.���`�.. ><((((�>`�.��.���`�.�><((((�> 
        ><((((�>`�.��.���`�.�.���`�...�><((((�>��.���`�.�. 
        `�.. ><((((�>`�.��.���`�.�><((((�>��.���`�.�. 





        -----Mensaje original----- 
        De: Shane Clays [ mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>  
        < mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > ] 
        Enviado el: Thursday, June 07, 2001 3:23 PM 
        Para: '[EMAIL PROTECTED]' 
        Asunto: RE: Better skimmer please !!! 


        It may also be the pump. The mags are crap, and it very well could 
        be 
        pushing less water and air than when it was new. You may consider 
        trying a 
        nice mag pump or something like that. My recommendation, if you go 
        that 
        route, would be to oversize the pump. Get one larger than 
        recommended. You 
        can then put a ball valve on it and turn it down a bit if you find 
        it is 
        pushing too much water. 

        Just a thought.... 

        Shane C. 

                -----Original Message----- 
                From:   DHOGG [SMTP:[EMAIL PROTECTED]] 
                Sent:   Thursday, June 07, 2001 1:24 PM 
                To:     [EMAIL PROTECTED] 
                Subject:        Re: Better skimmer please !!! 

                Hi reefman,have confidence in the berlin.Skimming depends 
        alot on 
        water condition and most of all on bio-load.If your tank has only 4 
        fish,you 
        did not mention what else,but it may just be that there is nothing 
        to 
        skim..What I like about berlin is that they don't collect only 
        water.Mine 
        can go 5-7 days without collecting,then all of a sudden it starts 
        skimming.The bubbles are really microscopic so you need shit in the 
        water 
        for them to start collecting. 
                Be patient. 
                On the other hand if you are not collecting and not 
        producing any 
        bubbles in the tube then you have  a problem. 
                It may just be your tank is cristal clean and does not need 
        to be 
        skimmed.. 
                Dan 

                        ----- Original Message ----- 
                        From: Jose Arturo Perez Vera 
        < mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
< mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > 
        > 
                        To: Reef Topica (E-mail) < mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>  
        < mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > >  ; 
        Reefkeeping Athiel (E-mail) < mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>  
        < mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > 
                        Sent: Thursday, June 07, 2001 10:15 AM 
                        Subject: Better skimmer please !!! 


                        Hi !! 
                        I have a Red Sea Berlin Classic skimmer with a RIO 
        2500 
        pump. 
                        I have almost 4-5 months that I dont get junk on it.

        I think 
        is not enough. My tank is a 42 gallons tank with 4 fishes. 

                        Can anybody recomend me a better skimmer? I am 
        looking for a 
        Hang On Tank model. 

                        Thank you in advance... 

                        Reef Man 
                        ICQ # 21731316 
                        ((�>`�.��.���`�.. ><((((�>`�.��.���`�.�><((((�> 
                        ><((((�>`�.��.���`�.�.���`�...�><((((�>��.���`�.�. 
                        `�.. ><((((�>`�.��.���`�.�><((((�>��.���`�.�. 


        ________________________________________ 

        LEAVING THE LIST 
        ===============To stop receiving messages you will need to send a 
        message to  [EMAIL PROTECTED]  with a command to remove
you 
        from the list.  The list manager  controls who belongs to the list. 

        For example: 
        -------------------------------------------------------------- 
               From: John Doe <[EMAIL PROTECTED]> 
                 To: [EMAIL PROTECTED] 
            Subject: <not needed> 

            UNSUBSCRIBE 
        -------------------------------------------------------------- 

        ________________________________________ 

        LEAVING THE LIST 
        =====To stop receiving messages you will need to send a message to 
        [EMAIL PROTECTED]  with a command to remove you from
the list. 
        The list manager  controls who belongs to the list. 

        For example: 
         -------------------------------------------------------------- 
               From: John Doe <[EMAIL PROTECTED]> 
                 To: [EMAIL PROTECTED] 
            Subject: <not needed> 

            UNSUBSCRIBE 
         -------------------------------------------------------------- 


        ________________________________________ 

        LEAVING THE LIST 
        ================ 
        To stop receiving messages you will need to send a message to
[EMAIL PROTECTED]  with a command to remove you from the list.
The list manager  controls who belongs to the list.  

        For example: 
         -------------------------------------------------------------- 
               From: John Doe <[EMAIL PROTECTED]> 
                 To: [EMAIL PROTECTED] 
            Subject: <not needed> 

            UNSUBSCRIBE 
         -------------------------------------------------------------- 
        
________________________________________

LEAVING THE LIST
===============To stop receiving messages you will need to send a message to  
[EMAIL PROTECTED]  with a command to remove you from the list.  The list 
manager  controls who belongs to the list.

For example:
 --------------------------------------------------------------
       From: John Doe <[EMAIL PROTECTED]>
         To: [EMAIL PROTECTED]
    Subject: <not needed>

    UNSUBSCRIBE
 --------------------------------------------------------------

Reply via email to