hey shane.
the reactor I built was out of clear acryllic and is only 1/8 thick i think.
no the reactor isnt under much preassure. if it was your water would be
pushed out.
I built mine for under 100 bucks. and turned out really nice.
http://www.geocities.com/vypr_2000/equip/calreactorfull.JPG
that is the one I built very easy and works AWSOME
Dave
----- Original Message -----
From: "Shane Clays" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, September 06, 2001 4:36 PM
Subject: Calcium Reactor Question
> Okay DIYers. Quick question. Does the main housing in a calcium reactor
have
> to be a thick ridgid plastic, or can you utilize a thinner plastic
housing?
> Do calcium reactors have that much pressure in them? It would depend, I
> guess, on the GPH that you are trying to push through them, but how many
GPH
> do you really end up using?? I am working on a plan for a very very cheap
> DIY calcium reactor, but it all hinges on whether I can use thinner
plastic
> for the housing.
>
> TIA everyone,
>
> Shane C.
> ________________________________________
>
> LEAVING THE LIST
> ================
> To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list.
The list manager controls who belongs to the list.
>
> For example:
> --------------------------------------------------------------
> From: John Doe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: <not needed>
>
> UNSUBSCRIBE
> --------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
