By the way, I forgot to add that the entire system cost me about 9 dollars,
which was the cost of the float valve.
I have just built a autotop off system that uses a vertical float valve
that you can purchase from Grainger. The float valve can either make an
open or closed circuit and you can wire it in with a pump or powerhead in a
bucket of fresh water. There are two float valves available, one has a max
of 30 watts and the other has a max of 60 watts. Once you hang it in your
sump and make the wire connections, all you need to do is plumb the
powerhead to the sump. Works really well.
I found this idea on a reef site, but I can't remember where, sorry.
Erich
David Hansen
<[EMAIL PROTECTED]> To:
<[EMAIL PROTECTED]>
Sent by: cc: (bcc: Erich
Ross/OTC)
reefkeeping-request@ Subject: AUTO TOP OFF
athiel.com
11/09/2001 09:47 AM
Please respond to
reefkeeping
Does anyone have a good set of DIY instructions for an autotop off system?
All of my equipment is under the tank in a cabinet so I don't have a whole
lot of room. Could someone please help?
Sincerely,
David Hansen
Warehouse Manager
sent via GoldMine on 11/09/01
phone: 205-278-8129
email: [EMAIL PROTECTED]
FAX: 205-941-1934
web: www.InLine.com
InLine - Internet for Business
________________________________________
LEAVING THE LIST
===============To stop receiving messages you will need to send a message
to [EMAIL PROTECTED] with a command to remove you from the
list. The list manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list.
The list manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
