Hello,Unfortunately that output was not logged and it will take a couple of hours to do a new check and get the output, but besides the specific numbers in the following output which i found (after posting my help request) in the mailing list archive the message i got was this:
[snip]
Pass 0:
Loading on-disk bitmap .. ok, 61048992 blocks marked used
Skipping 10074 blocks (super block, journal, bitmaps) 61038918 blocks will be
read
0%....20%....40%....60%..
lef \
left 0, 13223 /secccseccccc "r5" hash is selected
Flushing..finished
Read blocks (but not data blocks) 61038918
Leaves among those 141109
- leaves all contents of which could not be saved and
deleted \
5 Objectids found 414533
Pass 1 (will try to insert 141104 leaves):
Looking for allocable blocks .. finished
0%....20%....40%....60%....80%....Not enough allocable blocks, checking \
bitmap...there are 1 allocable blocks, btw
out of disk space
Aborted
[/snip]
So i guess i should do as you replied to the person posting this and do
a dd to a bigger partition and do the rebuild-tree there?
Here is the reply to the older post: [snip]you need to get a larger partition, dd hdg1 there, run 'reiserfsck --rebuild-sb' on the copy to enlarge the fs size and after that run 'reiserfsck --rebuild-tree' on it. or you can enlarge the existent hdg1.
Note: some disk space will be added to the current partition, if there was a reiserfs before, that fs metadata will be mixed with the current fs. to avoid
it, zero the added disk space first (dd if=/dev/zero ...) [/snip]I don't get the last part, if i do this and it works well i end up with an OK file system on the other partition, should i completely wipe the old partition before i dd it back to avoid problems? dd if=/dev/zero of=/dev/oldpart?
Do you think there's any hope getting my data back? Thanks for replying! /Johan Vladimir V. Saveliev skrev:
Hello On Thu, 2006-06-15 at 09:15 +0200, Johan Isacsson wrote:reiserfschk --rebuild-tree was aborted when it nearly had finished pass 1 and now i can't mount the partition.I no longer have the exact error message.Just before the filesystem got bad we had removed lots of data because the disk got full. Df then reported that there was lots of space left on that partition. After that we had to power cycle the server because it got hung up and after the reboot df reborted 100% usage and that some files couldn't be read. I den did a reiserfschk --check which said there wer fatal errors and that i needed to do a rebuild-tree, which i did.And after a long while it was aborted at about 90% of pass 1. I have the version 3.6.19-2 of reiserfs-progs (FC 4).Of course i read about taking a backup after i had done the --rebuild-tree :(Please, let us see complete reiserfsck --rebuild-tree output.
smime.p7s
Description: S/MIME Cryptographic Signature
