Hi James,
With Andrew buying Decibel, their older data sheets
are sure to become scarce. Some time ago I posted
the url and a promting to "download while you can
message."
Email me direct and I'll send you pdf copies of
information.
cheers
skipp
skipp025 at yahoo.com
www.radiowrench.com/sonic
> James <[EMAIL PROTECTED]> wrote:
> The hybrid is the square four port type, and it has two
> tuning caps labeled as "antenna tuning". I did look at
> the andrews site for this information without any luck.
> What URL are you using.
>
> James
>
> skipp025 wrote:
>
> >All the information is available on the Andrew
> >Decibel web site if you hunt it down.
> >
> >If the hybrid is the square 4 port type, you can
> >probably move it to the ham band without trouble.
> >
> >If your hybrid network is a cable type, your going
> >to have problems with preformance in the amateur
> >bands.
> >
> >cheers,
> >skipp
> >
> >www.radiowrench.com/sonic
> >skipp025 at yahoo.com
> >
> >>James <[EMAIL PROTECTED]> wrote:
> >>I have recently acquired a transmitter combiner (currently
> >>tuned for two 460 MHz channels that are 25 KHz apart). This
> >>unit contains the following parts (All decibel products).
> >>Circulators (appear to be narrow bandwidth) #DB4632-2D,
> >>Harmonic filters # DB4332-A, and the combiner DB4308. I
> >>am looking for the tuning instructions for this
> >>unit to move it into the ham band. The unit does not have a
> >>package part number on it. Can anyone help with information
> >>on this?? All the parts I have listed have the ability to be
> >>tuned.
> >>James
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
