|
We use a lot of there rf amplifiers and always
had very god service from them. thanks John
----- Original Message -----
Sent: Sunday, November 09, 2003 8:56
AM
Subject: [Repeater-Builder] Power
Amps
I am placing a GMRS repeater on the air in the near
future. I am wondering if anyone has used a Vocom RF Power
AMP Model # VVC050-XXRF (50 Watts Output). If anyone has any
input positive or negative please let me know.
Thanks in advance
Joe Hannay WYPU470
The specifications are as
follows:
|
FREQUENCY: |
420-512 MHz range. Factory set to
specific frequency on ID label. |
|
FREQUENCY RANGE: |
13.8 volt amplifier: +/- 5 MHz, 28
volts amplifiers; +/- 10 MHz of the factory set frequency without
tuning. |
|
INPUT DRIVE POWER: |
As specified on amplifier ID nameplate.
This is the power measured during final inspection that was required to
reach rated output power. |
|
MAXIMUM INPUT DRIVE
POWER: |
Nameplate input drive power +1 dB, or
drive required to reach maximum rated output power, whichever is
less. |
|
MAXIMUM RATED OUTPUT
POWER: |
Rated output as stated on amplifiers
nameplate. Operation beyond this power level will result in permanent
damage. |
|
DC SUPPLY CURRENT:
|
See Price List for specific DC current
requirements and operating voltage. |
|
MAXIMUM RATED LOAD VSWR FOR
CONTINUOUS DUTY OPERATION: |
1.2:1 (<5% reflected
power) |
|
MAXIMUM VSWR RATING WITHOUT
DAMAGE: |
5:1 all phase angles. VSWR or thermal
protection may operate above 2:1 VSWR. |
|
INPUT/OUTPUT
CONNECTORS: |
Type N FEMALE. |
|
SPURIOUS OUTPUTS: |
Meets FCC
requirements. |
|
HARMONICS: |
Meets FCC
requirements. |
|
OPERATING TEMPERATURE
RANGE: |
0 - 50 degrees C. |
|
INPUT RETURN LOSS: |
> 10 dB. |
|
COOLING: |
Fan
cooled. |
Your
use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|
