|
I am placing a GMRS repeater on the air in the near future. I am wondering if anyone has used a Vocom RF Power AMP Model # VVC050-XXRF (50 Watts Output). If anyone has any input positive or negative please let me know.
Thanks in advance
Joe Hannay WYPU470
The specifications are as follows:
|
FREQUENCY: |
420-512 MHz range. Factory set to specific frequency on ID label. |
|
FREQUENCY RANGE: |
13.8 volt amplifier: +/- 5 MHz, 28 volts amplifiers; +/- 10 MHz of the factory set frequency without tuning. |
|
INPUT DRIVE POWER: |
As specified on amplifier ID nameplate. This is the power measured during final inspection that was required to reach rated output power. |
|
MAXIMUM INPUT DRIVE POWER: |
Nameplate input drive power +1 dB, or drive required to reach maximum rated output power, whichever is less. |
|
MAXIMUM RATED OUTPUT POWER: |
Rated output as stated on amplifiers nameplate. Operation beyond this power level will result in permanent damage. |
|
DC SUPPLY CURRENT: |
See Price List for specific DC current requirements and operating voltage. |
|
MAXIMUM RATED LOAD VSWR FOR CONTINUOUS DUTY OPERATION: |
1.2:1 (<5% reflected power) |
|
MAXIMUM VSWR RATING WITHOUT DAMAGE: |
5:1 all phase angles. VSWR or thermal protection may operate above 2:1 VSWR. |
|
INPUT/OUTPUT CONNECTORS: |
Type N FEMALE. |
|
SPURIOUS OUTPUTS: |
Meets FCC requirements. |
|
HARMONICS: |
Meets FCC requirements. |
|
OPERATING TEMPERATURE RANGE: |
0 - 50 degrees C. |
|
INPUT RETURN LOSS: |
> 10 dB. |
|
COOLING: |
Fan cooled. |
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|
