This fuse holder can be purchased at any electrical supply house, the holder rating will be 60 amps as this is the next step above 30 - hence the larger fuse body size. Many of these supplies had the fuse holder removed for clearance to cabinets, it was rear mounted and the flange was usually taken off or folded under the supply box, this holder can be mounted onto the top corner of the cover if clearance is still an issue, if you do this make a sheet metal cover so the plastic does not get crushed when someone drops something onto the top. Do not exceed 40 amps as the loud humming can become smoking.
Bill wrote: > > Hi to all; I just purchased a GE Mastr II Power Supply and i am in > need of the Fuse Holder and Metal Cover. Thank You, Bill N8LXM > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ -- 73...Clark Beckman N8PZD Pursuant to U.S. Code, title 47, Chapter 5, Subchapter II, �227, "Any and all nonsolicited commercial E-mail sent to this address is subject to a download and archival fee of $500.00 U.S.". E-mailing denotes acceptance of these terms. Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
