RE: [Repeater-Builder] HP 8920 Service Monitor Help

[Jeff DePolo WN3A]

Title: Message

Talk to Rick at Amtronix (www.amtronix.com).  He'll tell you what it will take to fix it, and what it really will cost without replacing the entire module.  Usually it's just a blown mixer...                                                                           --- Jeff --------- Jeff DePolo WN3A Broadcast and Communications Consultant -----Original Message----- From: Scott Zimmerman [mailto:[EMAIL PROTECTED] Sent: Monday, November 17, 2003 3:29 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] HP 8920 Service Monitor Help My HP 8920 Service monitor has suffered an overpower condition to the Antenna IN connector for apparently it's last time (Accidental of course!!). Does anyone have a "real" component level service manual on this Monitor?   I have a manual that calls itself an "assembly level repair guide". That's all fine and good. Following it has told me that the problem is in the input/output section (A23). A call to HP for a replacement module sat me on the floor for a few hours!! They want as much for that module as I paid for the whole monitor!!!   I'm sure it's a relatively simple fix with (maybe) a common part, but without any board level docs. it's hard to say. I have disassembled the module to look for any burnt traces or parts blown off the board, but everything looks OK. I ran a few simple ohm meter checks, but with a multi-layer board, I can't tell where some of the traces are supposed to go.   Has anyone run into this before or know of a decent person to deal with when it comes to repair. I really on this monitor on a daily basis, and it's completely usable through the other 2 ports, so I'm not really enthused about sending it off to the repair shop for a few months.   Scott   M. Scott Zimmerman Zimmerman Electronics Amateur Radio Call N3XCC 612 Barnett Road Boswell, PA 15531 Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.