Re: [Repeater-Builder] Wacom WP-639 cans

[Kevin Custer]

Kevin Custer wrote: Kevin Custer wrote: [EMAIL PROTECTED] wrote: Perhaps someone has the tuning instructions for the WP-642 handy? I haven't had success in finding it, but I admit that my search hasn't been thorough nor up-to-date while I've been busy the past several months. It was purchased in like-new condition, and while I believe I've figured out its peculiarities on my own, it would be nice to see the factory's take on it. 73, -Matt W6KGB The tuning for the WP-642 is the same as the 641, but you'll have to tune the additional 2 cavities on the radio side; which are simply Band-Pass: http://www.repeater-builder.com/pdf/wp641.pdf Kevin This may also help: http://www.repeater-builder.com/pdf/wp643.pdf Kevin I *may* have gotten the 642 and 643 mixed up.  At any rate, the information is in the two PDF's above. The 642 *appears* to have 6-BPBR cavities, whereas the 643 is 4-BPBR (like the 641) with 2 additional BPF's on the radio side. It's early......  WCIS Kevin Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.