Hi,

I have taken over a controller replacement project for a local repeater group; 
the guy who had been working on it is SK. 

The main impetus for the project is this: the machine has an autopatch which 
has become unusable in half the metro area because the telco now requires 
10-digit dialing into the new area code that was created. What's more, an area 
code overlay is coming Any Year Now. 

The incumbent controller is an RC-96; I don't know the firmware version. Is it 
true, as I have been told, that the 96 will not handle multiple area codes as 
10-digit-dialed local calls? (Toll calls require a leading 1, which I think the 
'96 can filter on, so I don't think that they are an issue.) 

The plan is to replace the RC-96 with a new 7k, which is already on hand. The 
machine is open access and transmits one CTCSS tone during normal operation, 
and a different tone during Skywarn nets.

My predecessor started homebrewing an interface board to generate CTCSS 
external to the 7K controller. I got no documentation on this board. It appears 
to have a socket for an MX365/FX365 CTCSS encoder/decoder chip, but I was not 
given the chip. I have not found the MX365 at the usual distributors (Digi-Key, 
Allied, Newark, ...). Can anyone point me to a supplier for this chip?

An alternative that occurs to me is to substitute a CS-64 for the MX365. Is 
there a reason to prefer the MX365 over the CS-64 solution, or the other way 
around?

Surely we are not the first group to run into a problem due to area code 
changes. Any advice or suggestions re possible workarounds within the RC-96, or 
CTCSS generation, would be appreciated. 

Thanks in advance,
Bob N3HAT






 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 


Reply via email to