> <[EMAIL PROTECTED]> wrote: > The plan is to replace the RC-96 with a new 7k, > which is already on hand. The machine is open > access and transmits one CTCSS tone during > ormal operation, and a different tone during > Skywarn nets.
The SComm 7K is quite the nice controller, back in full production and now at firmware revsion 2.04a which allows the new VYEX digital audio board to drop in. I've already got 1500 custom wav files made up using software like Cool Edit. Forget the canned TI words, we're using real speech now. Park a Cat RLS/RBS-1000 multi port link board on the 7K number 2 port and you've got one really nice setup. The Cat board expands/adds three extra ports to the SComm Controller. > My predecessor started homebrewing an interface > board to generate CTCSS external to the > 7K controller. I got no documentation on > this board. It appears to have a socket for > an MX365/FX365 CTCSS encoder/decoder chip, > but I was not given the chip. I have not > found the MX365 at the usual distributors > (Digi-Key, Allied, Newark, ...). > nCan anyone point me to a supplier for > this chip? Forget it, get a regular Comm Spec tone encoder board which is directly controlled by the SComm 7K (Really Nice!) Part numbers are the SS-32 and the SM-32. If you want to steer the receiver pl detect line, use a TS-32. > An alternative that occurs to me is > to substitute a CS-64 for the MX365. Now you're talking, but you don't have to stay with the C64, check Comm Specs web site for current encoder models. > Is there a reason to prefer the MX365 > over the CS-64 solution, or the other > way around? The Comm Spec units are great and can be found cheap. They work very well. > Surely we are not the first group to > run into a problem due to area code > changes. Any advice or suggestions > re possible workarounds within the > RC-96, or CTCSS generation, would > be appreciated. > Thanks in advance, > Bob N3HAT You can sell the ACC controller on Ebay for good money. You'll probably be shocked by how much it will bring in. cheers skipp Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

