Hi Mike,
>Model number?
IP-223
>Is there a web site with more info?
http://www.vega-signaling.com/
There's an interesting white paper on the topic.
73,
Dave
>At 02:27 PM 12/20/03 -0600, you wrote:
>
> >Vega also makes a box that will do two links at the same time. Dealer
> >cost is about $875 per unit.
> >
> >KB5MBK
> >
> >-----Original Message-----
> >From: dep_ru_kidding [mailto:[EMAIL PROTECTED]
> >Sent: Saturday, December 20, 2003 1:34 AM
> >To: Repeater-Builder@yahoogroups.com
> >Subject: [Repeater-Builder] Re: IRLP "TYPE" BOARD LOOKING
> >
> >Maybe I didn't express the idea very well. If your not familiar with
> >the JPS NXU-2's they are a stand-alone "black box" that requires
> >nothing but power, Ethernet 10base=T connection and of course
> >programming on an IP address to locate the other end.
> >
> >SEE http://www.jps.com/index.asp?node=89
> >
> >The NXU-2's will find each other and maintain an open channel
> >providing all the signaling for repeaters or remote base operations.
> >An example of the two I have we had one end with a Motorola Spectra
> >and the other end was a DC remote and it didn't matter where the two
> >were as long as they found each other they worked. The issue here is
> >the JPS NXU-2 box's cost $1,500.00 each and I can't imagine no one
> >makes a similar device for a lot less.
> >
> >The end result I'm looking for is to use 802.11b modems as the "ISP"
> >and have the two units locate each other through my network. I figure
> >with dish antennas and good feedline I should see a 35-mile path no
> >problem.
> >
> >I hope this clarifies what I'm looking for, and YES I know there's
> >lots of old computers out there that could be thrown at this but when
> >you install stuff in solar powered sites, or sites with lots of RF a
> >computer running 50, 100, 200 MHz processors might not be a good idea
> >let alone the need for rebooting these babies ever so often.
> >
> >But please keep the cards and letters coming, with all that HAM radio
> >is someone out there must have something similar all ready operating.
> >
> >
> >
> >
> >
> >
> >
> >--- In Repeater-Builder@yahoogroups.com, Adi Linden <[EMAIL PROTECTED]>
> >wrote:
> > > > can pass it reliably enough. I have a couple of off brand boxes
> >like the
> > > > multitechs that were $150 each. Net2Phone has a 2 port unit that
> >would
> > > > require an account with them but, it would not cost to call from
> >unit to
> > > > unit. It is $200 ea. here.
> > >
> > > Pretty similar to a Cisco ata186. Our club is trying to link a
> >couple of
> > > repeaters using Cisco ata186's. Not sure how progess is going with
> >it. The
> > > difficulty I see is passing PTT/COS over a plain voice connection
> >and
> > > having the VoIP hardware automatically connect and reconnect
> >without user
> > > intervention.
> > >
> > > Adi
> > > --
> > > Adi Linden | va3adi | [EMAIL PROTECTED] | http://adis.ca
> > > +-----------------------------------------------------------------+
> > > IRLP Node 2590 in Sioux Lookout, Ontario
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >To visit your group on the web, go to:
> > http://groups.yahoo.com/group/Repeater-Builder/
> >
> >To unsubscribe from this group, send an email to:
> > [EMAIL PROTECTED]
> >
> >Your use of Yahoo! Groups is subject to:
> > http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >To visit your group on the web, go to:
> > http://groups.yahoo.com/group/Repeater-Builder/
> >
> >To unsubscribe from this group, send an email to:
> > [EMAIL PROTECTED]
> >
> >Your use of Yahoo! Groups is subject to:
> > http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>Yahoo! Groups Links
>
>To visit your group on the web, go to:
> http://groups.yahoo.com/group/Repeater-Builder/
>
>To unsubscribe from this group, send an email to:
> [EMAIL PROTECTED]
>
>Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
