Don, the filtering is in the pa deck assembly, it is kinda hard to remove it and continue to operate but it could be done with some fancy jumper cables. So if the reciever went sour just substitute another reciever using it's rx audio and cas to operate your controller and you should be back on-the-air quickly - as far as I know the unified chassis deals with the mobile pa deck and system controls but not the rx family.
ka9qjg1 wrote: > > Here is what I would temporally like to do until after the Holidays > leave the Micor > Unified UHF Repeater in the 6 Ft rack using the Micor UHF Amp and Pwr > supply > The receiver is Not working , But I have been told by members of this > group not to > run the Amp without the Filtering provided by the micor. > So I would like to temporally use My other Stand alone > working receiver hooked to a S-Com 5 to the Backplane of the micor, > I have the 4 wires > PTT And audio can someone Please tell Me where to attach to the > backplane before I > smoke something, no not that . > > Happy Holidays Don KA9QJG -- 73...Clark Beckman N8PZD Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
