I have a 4 dipole SRL210A4, that is the 4 dipole array with external wiring harness. I can remove 1 dipole if that is acceptable. Each dipole is 50 ohms. You will have to wait until the ICE melts on my storage roof. Shipping cost + a few $ for our repeater group.
A frequent contributor on the list is Burt Lang ve2bmq [EMAIL PROTECTED] who can help with designing and building your own. Contact me off-list at your convenience Eric Meth [EMAIL PROTECTED] --- In [email protected], Adi Linden <[EMAIL PROTECTED]> wrote: > I am looking for a single folded dipole that I can mount to the side of my > repeater tower for an APRS IGate and digi. Anyone have anything kicking > around that is inexpensive and can be packaged for shipping? > > I am also interested in information on how I can build a dipole or folded > dipole myself that's suitable for repeater use. I.e. I noticed severe > degration of the solder joint on my copper J-pole after it has been used > for my IRLP node. So I've been staying away from playing with a > soldered copper dipole. > > Adi > -- > Adi Linden | va3adi | [EMAIL PROTECTED] | http://adis.ca > +-----------------------------------------------------------------+ > IRLP Node 2590 in Sioux Lookout, Ontario Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
