Tune for best PA efficiency, not maximum output.
--- Jeff
---------
Jeff DePolo WN3A
Broadcast and Communications Consultant
> -----Original Message-----
> From: Tony King - W4ZT [mailto:[EMAIL PROTECTED]
> Sent: Monday, January 26, 2004 9:42 AM
> To: [email protected]
> Subject: Re: [Repeater-Builder] Z-Matcher Component Values
>
>
> Very nice pictures and good job getting component values for
> the EMR Z-matcher.
>
> One question comes to mind and that is, how are you going to
> adjust it?
> Lacking a built in directional coupler it would appear that
> the only thing
> you could do would be to adjust for maximum transfer of power
> as measured
> on the output of the duplexer. Any thoughts on this subject?
>
> 73,
> Tony W4ZT
>
>
>
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/Repeater-> Builder/
>
> To
> unsubscribe from this group, send an email to:
> [EMAIL PROTECTED]
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
