Tune for the least current draw at the rated (or de-rated, if that's what
you want) power output.
--- Jeff
> -----Original Message-----
> From: Chuck Kelsey [mailto:[EMAIL PROTECTED]
> Sent: Monday, January 26, 2004 8:58 PM
> To: [email protected]
> Subject: Re: [Repeater-Builder] Z-Matcher Component Values
>
>
> Would that mean to tune for the highest power level out at the lowest
> current draw?
>
> Chuck
> WB2EDV
>
>
>
> ----- Original Message -----
> From: "Jeff DePolo WN3A" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Monday, January 26, 2004 3:16 PM
> Subject: RE: [Repeater-Builder] Z-Matcher Component Values
>
>
> >
> > Tune for best PA efficiency, not maximum output.
> >
> > --- Jeff
> >
> > ---------
> > Jeff DePolo WN3A
> > Broadcast and Communications Consultant
> >
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/Repeater-Builder/
>
> To unsubscribe from this group, send an email to:
> [EMAIL PROTECTED]
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
