I have had similar problems. I suggest you start again, from the very beginning. Retune every stage. Sometimes there are false peaks, etc.
Then you need to consider the possibility that the exciter is broken. Did it work before you started tuning? Jeff . At 09:39 AM 1/26/2004, you wrote: >I am having problems getting my GE Mastr II VHF exciter to tune >properly. All goes well until I start tuning T110. I have my meter on >pins 5 (-) and 6 (+) but get no reading at all. I have adjusted T110 >all the way through but still see no reading. When I ground my meter >to chassis ground I get about 9 volts here. Does anyone have any >ideas what I might be doing wrong? I am fairly new to repeater >building and have not seen this problem yet. > >Thanks > >Jay > > > > > > >Yahoo! Groups Links > >To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > >To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > >Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
