Hello Derek - Nice to see ( and copy ) your page. I have a 4 bay VHF that I am just getting ready to attempt a new harness on and I appreciate the extra info - Dave / N�ATH
----- Original Message ----- From: "Derek B. McIntyre" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, January 27, 2004 6:09 PM Subject: [Repeater-Builder] Re: Phasing harness Hi Randy, If the folded dipole elements are similar to those of a Decibel DB- 420 or similar model, they are 100 ohms and can be matched with a combination of 75 ohm, and 35 ohm coax. You may also wish to use a different method of coupling both elements together with 50 ohm cable. There are different ways to do this. I have written up a short description of phasing lines and posted them at this web site. http://www.w4dex.com/ant.htm Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
