Thanks Derek for the info Randy > From: "Derek B. McIntyre" <[EMAIL PROTECTED]> > Reply-To: [email protected] > Date: Wed, 28 Jan 2004 00:09:02 -0000 > To: [email protected] > Subject: [Repeater-Builder] Re: Phasing harness > > Hi Randy, > If the folded dipole elements are similar to those of a Decibel DB- > 420 or similar model, they are 100 ohms and can be matched with a > combination of 75 ohm, and 35 ohm coax. You may also wish to use a > different method of coupling both elements together with 50 ohm > cable. There are different ways to do this. I have written up a > short description of phasing lines and posted them at this web site. > > http://www.w4dex.com/ant.htm > > Hope this helps! Let me know if you need specific measurements. > 73, Derek KC4FWC > > --- In [email protected], Randy Elliott <[EMAIL PROTECTED]> > wrote: >> Greetings to the group >> >> Just wondering if anyone can steer me to a web page for building > phasing >> harnesses for uhf folded dipole arrays. I'm looking at building a 2 > bay and >> possibly a 4 bay, and I will need a phasing harness for them. >> Thanks in Advance >> >> Randy Elliott VE3JPU > > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > >
Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
