Re: [Repeater-Builder] Re: 440 - 450 Low in High Out Repeaters

[XE2SI]

I was not mention anything about the performance of the Micor as a repeater, only as a reference of using same crystal for TX&RX, yes i am aware fo the offset crystal, normally this was  11.7+5.0 ( 16.7 Mhz.) so the TX will above of the RX.............. Juan ----- Mensaje original ----- De: skipp025 Hello Sailors, Regarding Juan's comment below. The micor mobile makes a great repeater when you keep the in cabinet desense under control. Cutting the channel element crystal for the proper injection and tuning will determin high-side/low-side tx-rx. Changing the offset crystal will modify the original motorhead 5 or 3MHz tx-rx spacing.   If you buy a poor quality channel element crystal, both the receive and transmit frequencies will drift as one. We used to call these "VFO Repeaters". Cheers Skipp Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.