probably less than 1.5 amps, if I remember rihgt. I have built my own 9.6 reg using the to-220 style regulators. I think I actually just used an NTE replacment that was 10.0 volts. Bolted right to the repeater chassis...
df ----- Original Message ----- From: "Don" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, March 22, 2004 4:22 PM Subject: [Repeater-Builder] Micor 9.6 > Need help with two questions, How much current dos the Micor Unified > chassis draw for the 9.6 ? Reason I will be using a 60 amp Rack mount > Astron BB supply And I have a 9.6 reg Board to put in. it is mounted > to a small heatsink . > > Other question I use the 0-50 Micro Amp Meter on top of the 6 Ft Rack > as the S-Meter for Incoming signals , it reads Half scale with No > signal and of course it is that way too and the Test set , But I would > like for it to read 0 with No signal ? > > Thanks Don KA9QJG > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
