Good memory. I was thinking about these wires, too. I couldn't remember the company name. As I recall, there were some on the list who had tried these wires and had great success.
Chuck WB2EDV ----- Original Message ----- From: "Burt Lang" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, March 27, 2004 3:26 PM Subject: [Repeater-Builder] Ignition Noise suppression > Someone asked about suppressing ignition noise in the fuel pump noise > thread. There was a discussion of this subject in one of the repeater > groups back some years ago. One poster indicated that he had excellant > results with Magnacor CN series ignition wire sets. They are pricey > like 150-200$ a set but apparently work better than anything else on the > market. See their web page at: > > http://www.magnecor.com/magnecor1/main.htm > > and look for the CN series info. > > Note: I have no experience with them - I am just reporting what I > remember was shared with the group at that time. I believe the poster > had a GM truck that was particularly bad for ignition noise and the > Magnacor wires cured it completely. > > Burt VE2BMQ>>> > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
