I think if you wrap up as much as possible with foil from the kitchen and attach clips to the foil and the motor block you could solve the noise - this is how the high perf race cars do it, it looks funny but it helps with wireless helmet mics and all.
Chuck Kelsey wrote: > > Have not seen that arrangement yet. Seems like it would be easier to shield. > > Chuck > WB2EDV > > ----- Original Message ----- > From: "Steve Bosshard" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Saturday, March 27, 2004 4:13 PM > Subject: RE: [Repeater-Builder] Ignition Noise suppression > > > Trouble with these new automobiles is that there are no plug wires or > > distributor or points, or even a single coil. The coil sits on top of > > the spark plug and next to the injector - DC and Pulses travel in the > > wire harness - one per cylinder. > > > > Steve -- 73...Clark Beckman N8PZD Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
